Injection Moulding Machine for Autoinjector and Pen Injector Components
Autoinjector and pen injector components are made on horizontal injection moulding machines, often in low to mid-cavity precision moulds, from PC, POM, PA12 or COP. Part size, cavity count and the number of slides set the machine. Dimensional repeatability matters most, because mechanism parts must fit within narrow tolerance windows on every lot.
Machine selection for these parts focuses on repeatable injection and holding, stable mould temperature from a qualified chiller and process data the buyer’s validation can rely on. Pratishna Engineers supplies horizontal injection moulding machines for drug delivery device components and can recommend a configuration for your parts.
Moulding Autoinjector Components?
Share the part drawings, resins and cavity plan, and Pratishna Engineers will recommend a suitable machine.
Machine Requirements for Autoinjector and Pen Injector Moulding
Drug delivery mechanisms leave little room for drift, so the machine and its peripherals become part of the validated process:
- Repeatable shot weight and holding pressure for tight tolerances
- Stable mould temperature from a chiller qualified at installation
- Slides and core pulls for dose dial threads and clips
- POM shrinkage control for snap arms and sliding interfaces
- Drying for PC, PA12 and COP before moulding
- Process data recording to support buyer validation
Recommended Machine for Autoinjector and Pen Injector Components
Most autoinjector and pen parts are small, so the press is chosen by mould size and slide layout more than projected area. Hybrid PH Series (120-140 T) machines, with electric injection, and E Series (75-180 T) machines cover many housings, dose dials and plunger rods. Larger multi-cavity housing tools may move up to H Series (120-350 T) or, for a wider platen, C Series (140-320 T) machines.
Not Sure Which Machine You Need?
Send each part drawing with its slide layout for a machine recommendation.
Why Choose Pratishna Engineers?
- Application-Based Machine Selection
- In-House Engineering & Manufacturing
- Multiple Machine Series
- Production-Focused Solutions
- End-to-End Technical Support
- Industry-Specific Solutions
- Machine Lifecycle Support
Injection Moulding Machine Buyer Resources
Download practical resources to help you select, size and specify the right machine.
Horizontal Injection Moulding Machine Selection Guide
A step-by-step guide covering the key inputs needed to select the right machine: product weight, projected area, number of cavities, plastic material, required clamping force, shot / injection capacity, mould dimensions, production quantity, cycle time and automation requirement.
Download PDFPDF · 265 KB
How to Calculate Clamping Force for an Injection Moulding Machine
A clear methodology that explains how clamping force is calculated, covering projected area, injection pressure, safety factor, number of cavities and material considerations.
Download PDFPDF · 363 KBMedical Sector Components & Machine Guide
A guide to Medical Sector components, covering syringes, IV set parts, luer fittings, connectors, pipette tips, petri dishes, test cassettes and device housings. It explains medical-grade materials, clean moulding area needs, dimensional control, and how to match each part to a suitable machine.
Download PDFPDF · 206 KB
FAQs / Buyer Questions
Questions drug delivery device makers ask us during machine planning.
Which Injection Moulding Machine Is Used to Make Autoinjector Components?
Small to mid-size horizontal machines with steady injection. Dose dials, plunger rods and caps often sit on Hybrid PH or E Series models, while larger housing tools with several slides can need a C or H Series machine.How Tight Are the Tolerances on Pen Injector Parts?
Tighter than most moulded parts, because the mechanism sets the delivered dose. Exact limits come from the device drawing. Mould temperature, holding pressure and resin lot all shift dimensions, so each is controlled and recorded during validation.Why Use POM for Mechanism Parts and COP for Drug Contact?
POM has low friction and good fatigue life, so it suits snap arms, clutches and sliding interfaces. COP or COC is used where parts touch the drug, for clarity and low extractables. Each shrinks differently, so tools are designed per resin.
What Does Validation Require From the Machine?
Buyers usually qualify the press, chiller and dryer at installation, then confirm the process window on each mould. Repeatable settings, stable temperature control and recorded process data make that work easier to complete and maintain.Can Pratishna Recommend a Machine for My Autoinjector or Pen Injector Part?
Yes. Share the part drawings, resin for each part, cavity counts, slide layout, mould dimensions and annual volume, and Pratishna Engineers will recommend a suitable machine.Does the Machine Suit Other Injection Device Parts Too?
Yes, subject to the mould. It can also run syringe plungers, luer lock fittings, inhaler actuator parts and veterinary syringe components, each with its own tool.
Technical Disclaimer
Disclaimer: The information provided in this webpage is for general informational and educational purposes only. It is based on technical references and industry information available at the time of preparation and may be subject to change. It does not constitute engineering, technical, commercial or professional advice, nor does it constitute a quotation, specification, warranty or contractual commitment by Pratishna Engineers.
Actual injection moulding machine and process requirements vary according to the component design, material, mould, production volume, machine configuration and operating conditions. The information, examples, calculations and recommendations provided should be independently evaluated and verified for the specific application before making any equipment, process or production decision. Information obtained from third-party sources remains subject to the accuracy and limitations of those sources.
Limitation of Liability: Pratishna Engineers makes no representation or warranty, express or implied, regarding the completeness, accuracy or suitability of the information for any particular application. To the extent permitted by applicable law, Pratishna Engineers shall not be liable for any loss, damage, cost or consequence arising from reliance on or use of the information contained in this webpage. Final machine selection, configuration and application suitability should be confirmed with Pratishna Engineers based on complete and accurate project requirements.
Talk to Our Engineers
Planning a New Injection Moulding Project?
Share your component, material, mould and production target. Our engineering team will help you identify the right machine configuration.
- Machine Sales
- +91 99690 38542
- Service Support
- +91 97689 28259
- Sales Email
- [email protected]