Injection Moulding Machine for Crate Label Holders, Card Holders and Bin Dividers
Crate label holders, card holders and bin dividers are made on small horizontal injection moulding machines in multi-cavity moulds, from PP, HDPE, PS or clear PC. Cavity count and runner layout set shot weight and tonnage. Clip-on holders depend on snap-fit retention that holds through repeated crate washing.
Here machine selection focuses on accurate small shots across many cavities, steady snap-fit dimensions and clean surfaces on clear windows. Pratishna Engineers supplies horizontal injection moulding machines for crate accessory moulding and can recommend a configuration based on your tool.
Moulding Label Holders and Dividers?
Share your part drawings, cavity plan and material, and Pratishna Engineers will suggest a machine.
Machine Requirements for Label Holder and Divider Moulding
These are small accessories run in high volumes alongside the crate, with fits that have to survive handling and washing. Points to check:
- Accurate small shot weight across many cavities
- Balanced runner so every cavity fills alike
- Snap-fit lugs held to size for wash-cycle retention
- Clarity grade PC or PS for window parts
- Polished mould and clean handling for clear windows
- Thin divider walls filled without short shots or warp
Recommended Machine for Crate Label Holders and Bin Dividers
Most label holder and divider tools fit the E Series (75-180 T), including high-cavity moulds for small clip-on holders. The H Series (120-350 T) suits very high-cavity tools, long dividers for large bins, or family moulds that run several accessories together. Very small tools below this range can be discussed on request.
Not Sure Which Machine You Need?
Share your accessory drawings and cavity plan for a recommendation.
Why Choose Pratishna Engineers?
- Application-Based Machine Selection
- In-House Engineering & Manufacturing
- Multiple Machine Series
- Production-Focused Solutions
- End-to-End Technical Support
- Industry-Specific Solutions
- Machine Lifecycle Support
Injection Moulding Machine Buyer Resources
Download practical resources to help you select, size and specify the right machine.
Horizontal Injection Moulding Machine Selection Guide
A step-by-step guide covering the key inputs needed to select the right machine: product weight, projected area, number of cavities, plastic material, required clamping force, shot / injection capacity, mould dimensions, production quantity, cycle time and automation requirement.
Download PDFPDF · 265 KB
How to Calculate Clamping Force for an Injection Moulding Machine
A clear methodology that explains how clamping force is calculated, covering projected area, injection pressure, safety factor, number of cavities and material considerations.
Download PDFPDF · 363 KBMaterial Handling Components & Machine Guide
A guide to Material Handling components, covering crates, bins, milk crates, lids, label holders, castor wheels, pallet feet and dunnage trays. It explains HDPE and PP, large projected areas, stacking strength, recycled material, and how to match each part to a suitable machine.
Download PDFPDF · 203 KB
FAQs / Buyer Questions
Short answers to what accessory moulders ask most.
Which Injection Moulding Machine Is Used to Make Crate Label Holders and Dividers?
Most of these tools run on the E Series. Very high-cavity moulds, long bin dividers or family tools that combine several accessories can move to the H Series.Why Do Clip-on Label Holders Come Loose After Washing?
Snap-fit lugs that are undersized, highly stressed or made in a grade that relaxes lose grip after repeated wash cycles. Holding lug dimensions steady and testing retention after washing catches this early.What Material Suits a Clear Card Holder Window?
A clarity grade of PC or PS, moulded in a polished tool. PC must be dried to avoid splay, and dust or regrind contamination shows clearly in a transparent window.
Can Holders and Dividers Run in One Family Mould?
Yes, if the parts are similar in material and weight. Large differences in part volume make cavities fill unevenly, so runner balance has to be worked out in the mould design.Can Pratishna Recommend a Machine for My Label Holder or Divider?
Yes. Share the part drawings, material, part weights, cavity plan, mould dimensions and annual quantity, and Pratishna Engineers will recommend a machine.Does the Machine Suit Other Material Handling Parts Too?
Yes. Foldable crate hinges and clips, container handles, pallet feet and small castor wheels often run on the same class of machine.
Technical Disclaimer
Disclaimer: The information provided in this webpage is for general informational and educational purposes only. It is based on technical references and industry information available at the time of preparation and may be subject to change. It does not constitute engineering, technical, commercial or professional advice, nor does it constitute a quotation, specification, warranty or contractual commitment by Pratishna Engineers.
Actual injection moulding machine and process requirements vary according to the component design, material, mould, production volume, machine configuration and operating conditions. The information, examples, calculations and recommendations provided should be independently evaluated and verified for the specific application before making any equipment, process or production decision. Information obtained from third-party sources remains subject to the accuracy and limitations of those sources.
Limitation of Liability: Pratishna Engineers makes no representation or warranty, express or implied, regarding the completeness, accuracy or suitability of the information for any particular application. To the extent permitted by applicable law, Pratishna Engineers shall not be liable for any loss, damage, cost or consequence arising from reliance on or use of the information contained in this webpage. Final machine selection, configuration and application suitability should be confirmed with Pratishna Engineers based on complete and accurate project requirements.
Talk to Our Engineers
Planning a New Injection Moulding Project?
Share your component, material, mould and production target. Our engineering team will help you identify the right machine configuration.
- Machine Sales
- +91 99690 38542
- Service Support
- +91 97689 28259
- Sales Email
- [email protected]