120 Ton Hybrid Injection Moulding Machine (PH Series)
The PH 120 Ton is a hybrid injection moulding machine from Pratishna Engineers, built for precision engineering parts, thin-walled components and multi-cavity moulds where shot-to-shot repeatability matters. A servo motor drives the injection through a ball screw, while a hydraulic clamp provides 120 tons of locking force. It offers two screw options of 35 and 32 mm, with shot weights of 151 and 126 g (PS) and injection pressure up to 201 MPa.
Pratishna Engineers is one of the top and trusted 120 ton hybrid injection moulding machine manufacturers in India. Headquartered in Mumbai, Pratishna has 35+ years of experience and more than 9,000 machines supplied to over 1,000 customers, and its hybrid machines with hydraulic locking and electric injection were among the first of their kind developed in India, backed by in-house engineering and after-sales support.
- Clamping force
- 120 T
- Screw options
- Ø35 · Ø32
- Shot weight
- 126 – 151 g
Need Help Selecting a Hybrid 120 Ton Machine?
Contact Pratishna Engineers to discuss your plastic injection moulding requirements and request Hybrid 120 ton specifications, application guidance and a quotation.
PH 120 Ton Hybrid Specifications
The PH 120 Ton is available in two screw configurations: A (Ø35 mm) and B (Ø32 mm). Injection unit values vary by screw; clamping, ejector and general specifications are common to both. Injection pressure is given in MPa, as in the Pratishna hybrid brochure. Specifications are subject to change in line with continuous product development.
Injection unit | Option A | Option B | |
|---|---|---|---|
| Specification | Unit | 35 mm | 32 mm |
| Screw diameter | mm | 35 | 32 |
| Screw L/D ratio | — | 19:1 | 20:1 |
| Max. swept volume | cm³ | 168 | 140 |
| Max. shot weight (PS) | g | 151 | 126 |
| Max. injection pressure | MPa | 168 | 201 |
| Rate of injection | cc/sec | 109 | 91 |
| Screw speed | rpm | 300 | 300 |
| Nozzle force | Tons | 3.6 | 3.6 |
Hydraulic ejector | Option A | Option B | |
|---|---|---|---|
| Specification | Unit | 35 mm | 32 mm |
| Ejector stroke | mm | 85 | 85 |
| Ejector force | Tons | 4.7 | 4.7 |
Locking unit | Option A | Option B | |
|---|---|---|---|
| Specification | Unit | 35 mm | 32 mm |
| Mould clamping force | Tons | 120 | 120 |
| Mould clamping stroke | mm | 300 | 300 |
| Mould thickness (min – max) | mm | 165 – 450 | 165 – 450 |
| Max. daylight opening | mm | 750 | 750 |
| Space between tie bars (H × V) | mm | 410 × 345 | 410 × 345 |
| Platen size | mm | 640 × 570 | 640 × 570 |
General | Option A | Option B | |
|---|---|---|---|
| Specification | Unit | 35 mm | 32 mm |
| Servo motor | kW | 12.5 | 12.5 |
| Heating capacity | kW | 8.0 | 8.0 |
| Total connected load | kW | 20.5 | 20.5 |
| Tank capacity | Litres | 260 | 260 |
| Machine weight | Tons | 3.9 | 3.9 |
| Floor space (L × W × H) | m | 4.2 × 1.25 × 1.75 | 4.2 × 1.25 × 1.75 |
Key Features
- Servo-driven injection with a ball screw for a very high level of repeatability in injection speed, position and pressure
- Smooth, high-speed and high-pressure injection up to 201 MPa and 109 cc/sec
- Two screw options: 32 mm for thin walls and long flow paths, 35 mm for shots up to 151 g (PS)
- Clamping stroke of 300 mm and 750 mm daylight opening for moulds 165 to 450 mm thick
- Tie-bar space of 410 × 345 mm, platens of 640 × 570 mm, and a moving platen on a linear motion guide
- Low power consumption, with a 12.5 kW servo motor and 20.5 kW total connected load
Applications
The PH 120 Ton is commonly used where part weight, dimensions and fill must repeat closely from shot to shot, often in multi-cavity moulds.
- Image to be provided by client
Plastic gears and precision mechanical parts
Electrical connectors and switch parts
- Image to be provided by client
Closures and dispensing parts
Medical and diagnostic consumables
- Image to be provided by client
Thin-walled components
- Image to be provided by client
Pen, cosmetic and small precision parts
Multi-cavity engineering parts
Other PH Series Hybrid Models
Need a Different Tonnage?
Compare the PH Series hybrid range of 120 and 140 tons, or the E Series for general parts, and get a suitable recommendation.
Why Choose Pratishna Engineers?
- Application-Based Machine Selection
- In-House Engineering & Manufacturing
- Multiple Machine Series
- Production-Focused Solutions
- End-to-End Technical Support
- Industry-Specific Solutions
- Machine Lifecycle Support
Injection Moulding Machine Buyer Resources
Download practical resources to help you select, size and specify the right machine.
Hybrid 120 Ton Specification Sheet
The full PH 120 Ton data for both screw options: screw diameter, shot weight, injection pressure and rate, clamping stroke, mould thickness, daylight, tie-bar space, platen size, ejector, motor power, weight and floor space.
Download PDFPDF · 78 KB- Image to be provided by client
Hybrid Injection Moulding Machine Brochure
The PH Series 120 and 140 ton models, with screw options, specifications and salient features.
Clamping Force & Shot-Size Calculation Guide
A clear method for calculating the clamping force and shot size your part needs, covering projected area, injection pressure, safety factor, number of cavities, part and runner weight, and material.
Download PDFPDF · 363 KB
FAQs / Buyer Questions
The answers our engineers give most often about the PH 120 Ton, before a specification is agreed.
What Is the PH 120 Ton Hybrid Injection Moulding Machine?
It is a hybrid injection moulding machine from Pratishna Engineers with servo-electric ball screw injection and hydraulic clamping, built for precision engineering parts, thin-walled components and multi-cavity moulds where shot-to-shot repeatability matters.What Can I Manufacture on a 120 Ton Hybrid Machine?
Typical parts include plastic gears and precision mechanical parts, electrical connectors and switch parts, closures and dispensing parts, medical and diagnostic consumables and thin-walled components.When Should I Choose the PH 120 Ton Over a Standard 120 Ton Machine?
Choose the hybrid when tolerance, part weight consistency or thin-wall filling is the main challenge. For general parts where these matter less, a standard E, C or H Series machine is usually better value.What Are the Screw Options on the PH 120 Ton?
The 120 Ton is available with two screws: the 35 mm screw gives a 151 g shot at up to 168 MPa and 109 cc/sec; the 32 mm screw gives a 126 g shot at up to 201 MPa and 91 cc/sec. The smaller screw gives the higher pressure.What Mould Size Fits the PH 120 Ton?
It takes moulds 165 to 450 mm thick within a tie-bar space of 410 × 345 mm, on platens of 640 × 570 mm, with a 750 mm daylight opening and 85 mm ejector stroke.
How Much Power Does the PH 120 Ton Use?
It has a 12.5 kW servo motor, 8.0 kW heating capacity and 20.5 kW total connected load. Electric injection draws power mainly when the screw moves, so consumption is lower than on a fully hydraulic machine.If 120 Ton Is Not the Right Size, What Other Options Are There?
The PH Series also offers the 140 Ton hybrid. For general parts, the E Series covers 75 to 180 tons, and larger parts suit the C, H or PHM Series.Does Pratishna Provide Installation and After-Sales Support?
Yes. Installation, commissioning, operator training, spare parts and after-sales technical support are provided as part of Pratishna’s machine lifecycle services.How Do I Get a Price for the PH 120 Ton?
Share your product drawing, material, part weight, tolerance, mould dimensions, cavities, production quantity and cycle time, and Pratishna Engineers will evaluate the configuration and provide a quotation.
Related Blogs, Guides & Articles
32 mm or 35 mm Screw on the PH 120: Pressure vs Shot Weight
Injection moulding screw size selection on an electric injection unit: how 32 mm and 35 mm screws trade pressure for shot volume, with POM and PP shots.
Moulding Precision Gears and Connectors on a 120 Ton Hybrid Machine
What a plastic gear moulding machine must control for POM gears and connectors: shrinkage, packing, gating and flame ratings, plus a tolerance check.
Power Consumption of a 120 Ton Hybrid vs Hydraulic Machine
Hybrid vs hydraulic power consumption on a 120 t job: where power goes, why connected load misleads, idle costs and kVAh billing, plus a worked example.
What Can You Make on a 120 Ton Hybrid Injection Moulding Machine?
What a 120 ton hybrid moulding machine suits: gears, connectors, closures, consumables and thin walls, with area limits and a worked cavity check.
Talk to Our Engineers
Planning a New Injection Moulding Project?
Share your component, material, mould and production target. Our engineering team will help you identify the right machine configuration.
- Machine Sales
- +91 99690 38542
- Service Support
- +91 97689 28259
- Sales Email
- [email protected]